Introduction4
The Harman Conquest Direct Vent Gas Stove is a listed
The installation of the Conquest Direct Vent Gas Stove must conform with local codes, or in the
absence of local codes, with National Fuel Gas Code, ANSI Z223.1 — latest edition and CAN 1
and .2 Installation Code.
Also for use in mobile (manufactured) homes after home is sited.
Mobile (manufactured) home installations must adhere to Title 24 CFR, Part 3280, or CSA Z240.4.
CAUTION: This appliance must be vented to the outside.
Installation and repair of the Conquest Direct Vent Gas Stove should be done by a qualified ser- vice person. The appliance should be inspected be- fore use and at least annually by a qualified service person. More frequent cleaning may be required due to excessive lint from carpeting, bedding material, etc. It is imperative that controlcompartments, burn- ers, and circulating air passageways of the Conquest be kept clean.
Due to high temperatures, the Conquest Direct Vent Gas Stove should be located out of traffic and away from furniture and draperies.
Children and adults should be alerted to the hazards of high surface temperatures and should stay away to avoid burns or clothing ignition.
Young children should be carefully supervised when they are in the same room as the appliance.
Clothing or other flammable materials should not be placed on or near the appliance. Surveiller les enfants. Garder les vetements, les meubles, lessence ou autres liquides a vapeur inflammables lin de lappareil.
When operating your Harman Conquest Gas Stove, respect basic safety standards. Read these in- structions carefully before you attempt to operate the stove. Failure to do so may result in damage to property or personal injury and may void the prod- uct warranty.
Consult with your local building code agency and insurance representative before you begin your installation to ensure compliance with local codes, including the need for permits and
Several issues must be addressed when select- ing a suitable location for your Conquest Gas Stove. Observing required clearances to combustible ma- terials, the proximity to a safe chimney or venting system location, and the accessibility of the gas and electrical supply must all be considered. In addition, selecting a location that takes advantage of the building's natural air flow is also desirable to maxi- mize the heating effectiveness of the stove. In many cases, this is a central location within the building.
Anysafety screen or guard removed for servicing an appliance must be replaced prior to operating the appliance.
This appliance may be installed in an after- market permanently located (mobile) home, where not prohibited by local codes.
This appliance is only for use with the type(s) of gas indicated on the rating plate. This appliance is not convertible for use with other gases, unless a certified kit is used.
Cet appareil peut etre installe dans un maison prefabriquee (mobile) deja installee a demeure si les reglements locaux le permettent.
Cet appareil doit etre utilise uniquement avec les types de gas indiques sur la plaque signaletique. Ne pas l utiliser avec d autres gas sauf si un kitde conversion dertifie est installe.
