![](/images/new-backgrounds/1041974/4197433x1.webp)
Only For Qualified Installers | INSTALLATION | 17 |
Round Tile Not
Used On Top Vent
Trim Ring Not
Used On Rear
Vent.
Allen Set
Screws
Tile Kit
Each tile kit contains six tiles and fifteen allen- set screws. If the Conquest is installed as a top vent, then the round tile is not used. If it is installed as a rear vent, then the trim ring is not used.
Installing Tiles
Below each tile opening are three threaded holes. In some cases it may be helpful to remove extra paint from the treads with a
1.Screw the set screws down until the top of the screw is about the thickness of the tile below the top surface.
2.Place the proper tile in the opening.
3.Observe the level of the tile. If the level of the tile is not satisfactory, remove the tile by press- ing down on one of the corners and adjust set screws accordingly.