Composite High-Beam Headlamp System (Vehicles with High Intensity Discharge Lighting Only)

1. Open the hood.

2.Remove the black retainer clips by lifting up.

3.Pull the headlamp assembly out.

4.Unplug the electrical connector.

5.Turn the bulb/socket assembly counterclockwise to remove it.

6.Put the new bulb/socket assembly into the headlamp assembly and turn it clockwise until it is tight.

7.Plug in the electrical connector.

8.Put the headlamp assembly back into the vehicle.

9.Install the two retaining clips.

6-38

Page 345
Image 345
Chevrolet 2001 manual