Chevrolet 2001 manual One-Piece Front Turn Signal Lamp Assembly

One-Piece Front Turn Signal

Lamp Assembly

1.Remove the headlamp assembly as shown under ªOne-Piece Composite Headlamp Systemº earlier in this section.

2.Twist the bulb socket to remove it from the headlamp assembly.

3.Pull the bulb straight out to remove it from the socket.

4.Push the new bulb into the socket until it snaps into place.

5.Put the bulb socket into the lamp assembly and turn it clockwise until it is tight.

6.Put the headlamp assembly back into the vehicle. Install the two retaining clips.

7.Install the two retaining clips.

6-39