PRODUCT SPECIFICATIONS
Item | Description |
Electrical Requirements | 2 HP / 120 V / 60 Hz / 13.2 Peak Amps, |
| 7.8 No Load Amps / 1600 Watt |
Cutter Bar Size | 16” |
Brake Stop | Electromagnetic Stop Within .15 Sec. After Shutoff |
Chain Type | ® |
#91VG “OregonChain” | |
Oiler System | Automatic |
Chain Guide Rail | |
Dimensions |
|
|
|
Weight | 11 Pounds |
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY WARNINGS AND PRECAUTIONS
1.KEEP WORK AREA CLEAN AND DRY. Cluttered, damp, or wet work areas invite injuries.
2.KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to handle this product.
3.STORE IDLE EQUIPMENT. When not in use, tools and equipment should be stored in a dry location to inhibit rust. Always lock up tools and equipment, and keep out of reach of children.
4.DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR DRUGS. Read warning labels on prescriptions to determine if your judgement or reflexes are impaired while taking drugs. If there is any doubt, do not attempt to use this product.
5.USE EYE AND HEARING PROTECTION. Wear ANSI approved safety impact eye goggles, full face shield and ANSI approved hearing protection (plugs or muffs) during use. ANSI approved safety impact eye goggles and hearing protec- tion are available from Harbor Freight Tools.
SKU 02810 | For technical questions, please call | Page 2 |
