Chicago Electric 42933 operating instructions Operating Controls

Operating Controls

Elevating Handle (88)

Yoke Pivot Clamp Handle (88)

Safety Guard (10)

Arm Index Knob (115)

Screw Clamp (137)

Switch (122) with Key (98)

Trigger

Bevel Index Knob (74)

Bevel Lock Knob (71)

Lock On Button

Safety Guard Lock Knob (5)

Anti-kickback Arm (13)

ON / OFF Switch – The Switch has a built-in locking feature which requires a key to be inserted before the saw can be turned ON. Removing the Key and pushing the OFF but- ton locks the saw against unintended use. For crosscutting, press the green Switch in, then squeeze and hold the Trigger. For rip cutting, press the green Switch in, squeeze the Trigger (motor starts), then push up on the Lock On Button (for rip cutting only) to keep the motor running without holding the Trigger in. Depressing the Trigger again will release the Lock On Button, turning the motor off.

Carriage Lock – The Carriage Lock Knob located on the left side of the Radial Arm, permits the saw assembly to be moved in or out, and locked at the desired posi- tion on the arm. It must be fully released for any crosscutting, and tightly locked for all operations in which the saw assembly is stationary. To lock turn clockwise. To unlock turn counterclockwise.

Arm Angle – The Arm Index Knob (142) and Washer (140) are located at the Col- umn Base (132). They can index, release,

SKU 42933 For technical questions, please call 1-800-444-3353. Page 12