21.NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. Don’t leave tool until it comes to a complete stop.
Grounding Instructions
To prevent electric shock
and death from incorrect grounding wire connection Read and follow these instructions:
4.Check with a qualified electrician or service personnel if the grounding instructions are not completely under- stood, or if in doubt as to whether the tool is properly grounded.
5.Use only
6.Repair or replace damaged or worn cord immediately.
with Three Prong Plugs
1.In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This tool is equipped with an electric cord having an equipment- grounding conductor and a ground- ing plug. The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances.
2.Do not modify the plug provided – if it will not fit the outlet, have the proper outlet installed by a qualified electri- cian.
3.Improper connection of the equip-
Grounding
Pin
125 V~ 3-Prong Plug and Outlet
(for up to 125 V~ and up to 15 A)
7.This tool is intended for use on a cir- cuit that has an outlet that looks like the one illustrated above in 125 V~
8.The outlet must be properly installed and grounded in accordance with all codes and ordinances.
9.Do not use an adapter to connect this tool to a different outlet.
Radial Arm Saw Safety Warnings
For Your Own Safety Read Instruction
Manual Before Operating Saw
1.DANGER! Coasting Cutting Tool Can Be Dangerous – Apply brake immediately to stop cutting tool when the switch is turned off.
SKU 42933 | For technical questions, please call | Page 5 |
