Workpiece and Work Area Set Up
y fet Sa
1.Designate a work area that is clean and well lit. The work area must not allow access by children or pets to prevent distraction and injury.
2.Route the power cord along a safe route to reach the work area without creating a tripping hazard or exposing the power cord to possible damage. The power cord must reach the work area with enough extra length to allow free movement while working.
3.Secure loose workpieces using a vise or clamps (not included) to prevent movement while working.
4.There must not be objects, such as utility lines, nearby that will present a hazard while working.
General Operating Instructions
The Saw features a variable speed Trigger. For increased strokes per minute, squeeze the Trigger harder. For decreased strokes per minute, apply less pressure to the Trigger.
Note: When cutting softer materials, use a faster speed. When cutting harder materials, use a slower speed.
General Cutting
Setup
no rati Ope
ec
Maintenan
1.Install the Blade and adjust the Handle.
2.Press and release the Trigger to ensure that the Trigger Lock is off.
3.Holding the Saw with the Trigger released, plug the Power Cord into a 120V electrical outlet.
4.To begin sawing, gripping the saw firmly with both hands, rest the front of the Shoe on your workpiece with the blade above the work.
IMPORTANT: Do not start the Saw if the Saw Blade is in contact with anything before operation.
5.Depress the Trigger.
6.Allow the tool to come up to full speed before touching the work material.
7.Guide the Saw Blade into the workpiece.
WARNING! Keep the Shoe pressed firmly against the workpiece while cutting to prevent tool kickback.
8.For continuous cutting, press and release the Trigger Lock button, then release the Trigger.
9.Maintain a smooth motion, guiding the Blade through the material as it is cut. Follow the cut. Do not press too hard. If the saw slows down as it is cutting, apply less pressure on the saw.
10.To stop the saw, release the Trigger when not using the Trigger Lock feature. If using the Trigger Lock function, press and release the Trigger.
11.Allow the tool to come to a complete stop before setting it down.
12.To prevent accidents, turn off the tool and disconnect its power supply after use. Clean, then store the tool indoors out of children’s reach.
Page 10 | For technical questions, please call | Item 65570 |
