Pioneer VSX-D908S MULTI-ROOM set up, Press System Setup on the remote control

Using Other Functions

MULTI-ROOM set up

After you have completed the necessary connections for MULTI-ROOM operation you need to set up the receiver for such operation. Follow the instructions below. The following page explains how to use the MULTI- ROOM function once it’s set up.

			ë￿	1	1 Turn on your TV and the receiver.
S0URCE			RECEIVER		Make sure your TV is set to the receiver.
	MULTI	SYSTEM
	OPERATION	OFF
DVD/LD	TV/SAT	VCR1	VCR2
	MULTI CONTROL				2 Press SYSTEM SETUP on the remote control.
CLASS	MPX	BAND	DIRECT ACCESS
CD	MD/	TUNER	TV CONT
	TAPE1
¦￿	7	3	8		The REMOTE SETUP MENU appears on your TV screen. You can
- TUNING +		- STATION +
1 Á￿ 4 ¢					escape from this screen at any time by pressing SYSTEM SETUP
DTV ON/OFF	DTV MENU	- CHANNEL +
1	2		3		again.

	4	5		6
	7	8		9		Multi-Room
						Volume Level
	GUIDE			EXIT
		0		ENTER	1	[VARIABLE]
	+10			DISC
						IR Receiver
		TV				[PIONEER]
	TV VOL TV CONTROL			VOLUME		[EXIT]
		TV FUNC
						CAUTION : If the "FIXED"
						position is chosen, the
	EFFECT	MENU		MUTE		volume will be loud.
	/CH SEL
				FUNCTION	3,4,5
		ENTER		SELECT
2,6				SIGNAL		3 Use the 5´° buttons to select the MULTI-ROOM set
	SETUP		ADVANCED	STANDARD
			2/dts
	SYSTEM					up mode and press ENTER.
	SETUP	MIDNIGHT	DSP	STEREO
	REMOTE
				DIGITAL NR

4Select the VOLUME LEVEL by using the 2´3 buttons.

DIGITAL MULTI PROCESSING AMPLIFIER	If you hook up a just a power amplifier in the sub room the VSX-
REMOTE CONTROL UNIT
	D908S will act as a pre-amp. In this case choose VARIABLE for the
	VOLUME LEVEL setting. If you hook up a full integrated amplifier in
	the sub room (such as another Pioneer VSX receiver) choose FIXED
	for the VOLUME LEVEL setting.

5Select the IR RECEIVER type with the 5´° buttons and select the type by using the 2´3 buttons.

If you have the Pioneer-made MR-100 select PIONEER. If you have an IR RECEIVER from a different company, select OTHER.

6Move to the EXIT setting and press ENTER to exit MULTI-ROOM set up and return to normal operations.

You can leave the MULTI ROOM set up mode any time by pressing the SYSTEM SETUP button.

Some IR RECEIVERS may not work with this system, check with a PIONEER representative to be sure.

CAUTION!

If the MULTI ROOM is set to FIXED the volume on the main unit will be set to maximum. Thus, when output, it will be extremely loud. Please set the master volume controls of the integrated amplifier in the sub room very low at first and experiment to find the correct volume.

OPERATION

73