Pioneer VSX-D908S Setting up the direct function, Using the system off button

Using Other Functions

Using the system off button

This button will turn off the receiver and any component that has programmed into the SYSTEM OFF settings (see above) as well as turn off all PIONEER components regardless of whether they have been programmed into SYSTEM OFF. If you use this feature when a DVD is playing, the player will stop the play mode before switching off.

1

ë￿

S0URCE	RECEIVER
MULTI	SYSTEM
OPERATION	OFF

DVD/LD TV/SAT VCR1 VCR2

	MULTI CONTROL
CD	MD/	TUNER	TV CONT
	TAPE1
CLASS	MPX	BAND	DIRECT ACCESS
¦￿	7	3	8
- TUNING +		- STATION +

1 Press the SYSTEM OFF button on the remote control.

Setting up the direct function

The direct function is designed in case you have an external video source connected to your TV (a video source that is not going through the VSX-D908S). For this explanation we’ll call this the “external video deck.” You’d like to control external video deck with this unit’s remote control so you’ve assigned it a function button (for example purposes, the VCR 2 button). Yet, if you put the receiver in VCR 2 mode you’ll get no picture on your TV because the external video deck signal is not going through the VSX-D908S. To get around this problem you set the DIRECT FUNCTION for VCR 2 to OFF. Now when you press VCR 2 function button you can control the external video deck with the remote but the receiver does not go into VCR 2 mode.

			ë￿
S0URCE			RECEIVER		1 Press REMOTE SETUP and 4 at the same time to
	MULTI	SYSTEM
	OPERATION	OFF
DVD/LD	TV/SAT	VCR1	VCR2	2
					select the DIRECT FUNCTION mode.
	MD/
	MULTI CONTROL
CD	TAPE1	TUNER	TV CONT
CLASS	MPX	BAND	DIRECT ACCESS

3

1

¦￿ 7

- TUNING +

1 Á￿

DTV ON/OFF	DTV MENU
1	2

4 5

7 8

GUIDE

0

+10

TV

TV VOL TV CONTROL

38

-STATION +

4 ¢

-CHANNEL +

3

6

9

EXIT

ENTER

DISC

VOLUME

Direct Function

You can choose whether the commander sends a function code or not , when you press each Multi-control button.

1Select function.

2Input YES or NO.

TRANSMIT YES =1 NO =2

EXIT=Remote setup

1,4

TV FUNC

EFFECT	MENU	MUTE	2 Select a component by pressing it’s MULTI CONTROL
/CH SEL
		FUNCTION	button.
	ENTER
		SIGNAL
		SELECT	3 Set the DIRECT FUNCTION of each external source to
	2/dts
SYSTEM	ADVANCED	STANDARD
SETUP

REMOTE	MIDNIGHT	DSP	DIGITAL NR	NO by pressing	2 .
SETUP			STEREO

DIGITALREMOTE CONTROL UNIT	4 Press REMOTE SETUP to exit the DIRECT FUNCTION
MULTI PROCESSING AMPLIFIER
	mode.
	The default setting is all YES. If you have turned a DIRECT
	FUNCTION to NO and want to turn it back to YES, follow the
	directions above and press 1 in step 3.

68