Pioneer VSX-D908S Multi Operations, To cancel MULTI-OPERATION Setup mode, Press Remote Setup

Using Other Functions

Multi Operations

Multi operations allow you to tell the receiver and your other components to do a number of things with the push of just two buttons on the remote control. For example, you can program the unit to turn on your TV, turn on your DVD player, go into a specific sound mode and start playing the loaded DVD. This feature allows you to decide which operations you want performed as well as the order in which you want them performed.

The steps below show you how to program a string of up to 5 different operations based on eight possible components. You don’t need to program the power of this unit, or any PIONEER product, to go on, it/they will do so automatically when the MULTI OPERATION function is used. Also, for some DVD players you won’t need to program a play command. Most DVDs will stsrt to play automatically if their power goes on and a DVD is loaded.

Be sure to recall or teach the remote control commands for each component before attempting multi operations (see “Setting Up the Remote Control to Control Other Components,” p. 50).

			ë￿	1
S0URCE			RECEIVER
	MULTI	SYSTEM
	OPERATION	OFF
DVD/LD	TV/SAT	VCR1	VCR2	3,4
	MULTI CONTROL
CD	MD/	TUNER	TV CONT
	TAPE1
CLASS	MPX	BAND	DIRECT ACCESS
¦￿	7	3	8
- TUNING +		- STATION +
1 Á￿ 4 ¢				2
DTV ON/OFF	DTV MENU	- CHANNEL +
1	2		3
4	5		6
7	8		9	5
GUIDE			EXIT
	0		ENTER
+10			DISC

TV

TV VOL	TV CONTROL	VOLUME
	TV FUNC
EFFECT	MENU	MUTE
/CH SEL
		FUNCTION
	ENTER
		SIGNAL
		SELECT
	2/dts
SYSTEM	ADVANCED	STANDARD
SETUP

2	REMOTE	MIDNIGHT	DSP	STEREO
	SETUP
				DIGITAL NR
	DIGITAL MULTI PROCESSING AMPLIFIER
		REMOTE CONTROL UNIT

1Turn on your TV and the receiver.

Make sure your TV is set to the appropriate video input (for example, VIDEO 1).

2Press REMOTE SETUP and 3 at the same time to select the MULTI OPERATION SETUP mode.

The REMOTE SETUP menu appears on your TV screen. The MULTI CONTROL and the SYSTEM OFF buttons start to blink.

To cancel MULTI-OPERATION SETUP mode

Press REMOTE SETUP.

Multi-operation

1Select an item from the

Multi-Contorol buttons. (ex. DVD)

2Select the operation button. (ex. DVD = MENU)

3First command has been learned.

4You can repeat this proccess for 5 commands. EXIT=Remote setup

3Press the FUNCTION button that you want to use to start the MULTI OPERATION.

You can use any function button for this procedure. It doesn’t matter which one you choose but for example purposes we’ll use the DVD/LD button.

This function button will be used when you want to recall the MULTI OPERATION commands for use (see the next page: “performing multi operations”).

Also, the SYSTEM OFF button will blink but can't be used to recall MULTI OPERATION commands. See the page 67 for instructions how to use the SYSTEM OFF button.

OPERATION

4Press the MULTI CONTROL button for the component whose operation you want to start MULTI OPERATIONS with (for example, TV CONT button).

The selected button will light steadily.

•Each button can perform various preset multi operations (see step five on the page 66).

5Press the operation, for example TV (POWER), you want to input.

65