Pioneer VSX-D908S Front default setting is Large, Center default setting is Large

3,4

ë

S0URCERECEIVER

MULTI SYSTEM

OPERATION OFF

DVD/LD TV/SAT VCR1 VCR2

	MULTI CONTROL
CD	MD/	TUNER	TV CONT
	TAPE1
CLASS	MPX	BAND	DIRECT ACCESS
¦	7	3	8
- TUNING +		- STATION +
1 Á 4 ¢
DTV ON/OFF	DTV MENU	- CHANNEL +
1	2		3
4	5		6
7	8		9
GUIDE			EXIT
	0		ENTER
+10			DISC
	TV
TV VOL	TV CONTROL		VOLUME
	TV FUNC
EFFECT	MENU		MUTE
/CH SEL

FUNCTION

ENTER

SIGNAL

SELECT

		2/dts
SYSTEM		ADVANCED	STANDARD
SETUP
REMOTE	MIDNIGHT	DSP	STEREO
SETUP

DIGITAL NR

DIGITAL MULTI PROCESSING AMPLIFIER

REMOTE CONTROL UNIT

Surround Sound Set Up

3Specify the type of speakers you connected. See the explanations below for the meaning of each size.

1Press 2 or 3 to move the hand to LARGE, SMALL, or NO (you can’t select NO for the FRONT speakers).

2Press °.

3Repeat 1 and 2 for each speaker.

Depending on your choices the sound will be routed differently, as explained here.

FRONT (default setting is LARGE)

•Select small to send bass frequencies to the sub woofer.

•Select large if your speakers will reproduce bass frequencies effectively or if you did not connect a sub woofer.

(If you select small for the front speakers the sub woofer will automatically be switched YES. Also,the center and surround speakers cannot be set to large if the front speakers are set to small. In this case, all bass frequencies are sent to the sub woofer.)

CENTER (default setting is LARGE)

•Select large if your speaker will reproduce bass frequencies effectively.

•Select small to send bass frequencies to the other speakers or sub woofer.

•If you did not connect a center speaker, deselect it. In this case, the center channel is output from the front speakers.

SURROUND (default setting is LARGE)

•Select large if your speakers will reproduce bass frequencies effectively.

•Select small to send bass frequencies to the other speakers or sub woofer.

•If you did not connect surround speakers deselect them. In this case, the sound of the surround channels is output from the front and center speakers.

SUB WOOFER (default setting is YES)

•Leave it selected if you connected a sub woofer.

•If you did not connect a sub woofer deselect it. In this case, the bass frequencies are output from the front or surround speakers.

•Choose the PLUS setting if you want stronger reproduction of deep bass sounds.

•If you select PLUS the bass frequencies that would normally come out the front and center speakers are all routed to the sub woofer.

4Select EXIT with the 5´° buttons and press ENTER to return to the SYSTEM SETUP MENU.

Next, proceed to CHANNEL DELAY below.

If you want to change a setting before proceeding

Simply use the arrow buttons to go back.

SET UP

27