Techno Tidbits & Problem-solving

Troubleshooting

Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used. If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest PIONEER authorized service center or your dealer to carry out repair work.

Symptom

Cause

Remedy

The power does not turn ON.

•The power plug is disconnected.

•The protection circuit may have been activated.

•Connect the power plug to the wall outlet.

•Disconnect the power plug from the outlet, and insert again.

The unit does not respond when the

• Static electricity caused by dry air.

• Disconnect the power plug from

buttons are pressed.

 

the outlet, and insert again.

No sound is output when a function

• Improper connections.

• Make sure the component is

is selected.

 

connected correctly (see p. 8-15).

 

• Sound is muted.

• Press MUTE on the remote control.

 

• The volume is turned down.

• Adjust MASTER VOLUME.

 

• The TAPE 2 MONITOR is ON.

• Press the TAPE 2 MONITOR

 

 

button.

 

• Speakers are turned OFF.

• Press SPEAKERS (A/B) to select

 

 

the speakers you connected.

 

• DIGITAL/ANALOG switch is set

• Set SIGNAL SELECT (see p. 40)

 

incorrectly.

 

No image is output when a function

• Improper connections.

• Make sure the component is

is selected.

 

connected correctly (see p. 9).

 

• The input source is not properly

• Press the correct function button.

 

selected.

 

Considerable noise in radio

• Incorrect frequency.

broadcasts.

• The antenna is not connected.

 

• Digital cables are near the antenna

 

terminals and wires.

•Tune in the correct frequency.

•Connect the antenna (see p.13).

•Digital cables away from the antenna terminals and wires.

FM broadcasts

•The FM antenna is not fully extended or is poorly positioned.

•Weak radio signals.

•Fully extend the FM wire antenna, position for best reception, and secure to a wall.

•Connect an outdoor FM antenna (see p.13).

AM broadcasts

•The AM antenna is poorly positioned.

•Weak radio signals.

•Interference caused by other equipment (fluorescent lamp, motor, etc.).

•Adjust the direction and position for best reception.

•Connect an additional internal or external AM antenna (see p.13).

•Turn off the equipment causing the noise or move it away from the receiver.

•Place the antenna farther away from the equipment causing the noise.

Broadcast stations cannot be

• Weak radio signals.

• Connect an outdoor antenna (see

selected automatically.

 

p.13).

Sub woofer output is very low

• Settings route signal away from

• To get more signal to the sub

 

Sub woofer

woofer set it to PLUS or

 

 

choose SMALL for the FRONT

 

 

speakers.

 

 

 

80

Page 79 Page 81
Page 80
Image 80
Pioneer VSX-D908S operating instructions Troubleshooting, Symptom Cause Remedy, FM broadcasts, AM broadcasts
Page 79 Page 81

VSX-D908S specifications

The Pioneer VSX-D908S is a remarkable home theater receiver that epitomizes the blend of advanced technology and user-friendly design. Launched in the early 2000s, this versatile component remains a popular choice for audio enthusiasts seeking to enhance their home entertainment experience.

One of the standout features of the VSX-D908S is its powerful amplification system, capable of delivering up to 100 watts per channel across five channels. This ensures that users can enjoy dynamic sound reproduction, even with demanding audio tracks or during intense movie scenes. The receiver supports both Dolby Digital and DTS surround formats, making it an ideal choice for those looking to immerse themselves in a cinematic experience at home.

The VSX-D908S also boasts multiple inputs and outputs, allowing users to connect a variety of audio and video sources. With several composite, S-video, and component video inputs, it accommodates a range of devices, from DVD players to gaming consoles. Furthermore, the receiver features a built-in AM/FM tuner and supports the playback of music CDs, making it a comprehensive solution for all entertainment needs.

Another notable characteristic is the advanced DSP (Digital Signal Processing) technology that the VSX-D908S incorporates. This technology allows for the simulation of different acoustic environments, enabling the user to customize their listening experience according to their preferences. With multiple preset sound fields, including options for concert halls and theaters, the receiver adapts to various audio situations seamlessly.

For those who value ease of use, the VSX-D908S includes a user-friendly interface and remote control. The intuitive layout of the front panel makes it simple to navigate settings, adjust volumes, and switch between sources. The inclusion of a multi-language on-screen display further enhances the user experience, catering to a broader audience.

In addition to its impressive audio capabilities, the Pioneer VSX-D908S also emphasizes build quality, featuring solid construction and reliability. With its robust design, users can expect long-term performance without compromising on sound quality.

Overall, the Pioneer VSX-D908S stands out as a home theater receiver that harmonizes performance, versatility, and user-friendliness. It continues to be a solid option for anyone seeking to elevate their audio-visual setup, making it a notable piece of equipment in the world of home entertainment.
Top Page Image Contents