Operating Instructions
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Tool Set Up
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Squeeze and release the Trigger and unplug the tool from its electrical outlet before performing any procedure in this section.
Installing the Saw Blade
Safety
1.If there is an installed blade, remove it by opening the Chuck and pulling the blade out. To open the Chuck, rotate it counterclockwise and hold it in the open position.
2.Release the Chuck to close it.
3.To install the new Saw Blade, rotate and hold the Chuck counterclockwise while inserting the Saw Blade and pushing it in to its deepest position.
4.Release the Chuck to close it.
5.Check that the Saw Blade is firmly locked in place and that the teeth are pointed downward.
WARNING! To prevent serious injury: Before plugging in the Power Cord for each use, wearing work gloves, pull on the Saw Blade to make sure it is securely locked in the Chuck.
Setup
Handle Rotation
1. For comfort and controlled cutting from any | 2. To rotate the Handle, press the Rotation |
angle, the Handle may be rotated up to | Switch and turn the Handle to the desired |
180° with five positive stops (0°, 45°, 90° to | position. Check to make sure the Handle |
the left and 45° and 90° to the right). | is locked into the chosen position. |
Operation
Maintenance
Item 65570 | For technical questions, please call | Page 9 |
