Chicago Electric 65712 manual Maintenance Servicing, Please Read Following Carefully

Maintenance And

Servicing

Procedures not specifically explained in this manual must be performed only by a qualified technician.

To prevent serious injury

from accidental operation:

Unplug the Garage Door Opener from its electrical Outlet before performing any inspection, maintenance, or cleaning procedures.

To prevent serious injury from tool failure:

Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.

1.BEFORE EACH USE, inspect the general condition of the Garage Door Opener. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, dam- aged electrical wiring, and any other condition that may affect its safe operation.

2.LIMIT AND FORCE SETTINGS: Weather conditions may cause some minor changes in the Door opera- tion, requiring some re-adjustments particularly during the first year of operation. Always repeat the “Safety Reverse” test after any adjustment. Refer to manual for instructions.

3.REMOTE CONTROL: The alkaline Batteries (23AE12V) should produce power for up to three months. If the transmission range decreases, re- place the Battery. To do so, use a screwdriver blade to pry open the Cover. Insert the new Battery posi- tive side up. Then replace the Cover. Do not dispose of the old Battery with household waste. Take the Battery to a proper disposal center.

4.OPENER LIGHT: To replace the Opener Light open the Light Cover (34). Unscrew and remove the old Light Bulb, and replace with a new 25 Watt Light Bulb.

5.WARNING! If the Power Cord of this Garage Door Opener is dam- aged, it must be replaced only by a qualified service technician.

PLEASE READ THE

FOLLOWING CAREFULLY

The manufacturer and/or distributor has provided the parts list and assembly diagram in this manual as

a reference tool only. Neither the manufacturer or distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product, or that he or she is qualified to replace any parts of the product. In fact, the manufacturer and/or distributor expressly states that all repairs and parts replacements should be undertaken by certified and licensed technicians, and not by the buyer. The buyer assumes all risk and liability arising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of

replacement parts thereto.

SKU 65712 For technical questions, please call 1-800-444-3353. Page 27