Setting Closing Limit:
Figure V | Figure W |
9.Press the “UP” Button and the Digital Display will indicate “2”. Press and release the “SET” Button. The Digital Display will indicate a flashing “2”. The unit is now ready for setting the close limit. (See Figures V and W.)
Figure X | Figure Y |
10.Press the “DOWN” Button. The Motor will move the door towards the close posi- tion. The Digital Display will indicate a flashing “u”. The CLOSE position can be adjusted by pressing the “UP/DOWN” Button. Press the “SET” Button when the door reaches the desired CLOSE position to store the data. The Digital Display will indicate a steadily glowing “2”. (See Figures X and Y.)
Figure Z | Figure AA |
11.The unit is waiting for you to enter other modes. Press the “SET” Button if no other setting is to be programmed right now. The Digital Display will indicate “H”.
Now setting the limits is finished. (See Figures Z and AA.)
Note: If only the OPEN/CLOSE limit is set, the function of automatic closing and the Light Switch is not available in the unit, and the default Open/Close Force is “4” level.
SKU 65712 | For technical questions, please call | Page 21 |
