Specifications
Electrical Rating | 120V~ / 60Hz / 4.8A | |
|
| |
Motor No Load Speed | 3,550 RPM | |
|
| |
Arbor Size | 5/8" | |
|
| |
Max. Accessory Diameter | 7" | |
Bevel Cut | ||
Maximum Depth of Cut | 1" @ 90° | |
3/5" @ 45° | ||
| ||
Blade Type | Diamond, continuous rim (sold separately) |
SAFETY
184892
Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Power Switch of the tool to its “OFF” position, remove the Safety Lock and unplug the tool from its electrical outlet before assembling or making any adjustments to the tool.
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
Functions
| Miter Guide | Upper Blade | |
| Guard (2) | ||
| (40) | ||
Rip Fence (12) | Table Top (7) | ||
|
Saw Blade (26)
(under Upper Guard)
|
| Lower Blade |
|
|
| Guard (23) |
|
| Safety Lock | Water Tray (57) |
|
|
|
| |
| Power Switch (56) |
|
|
| Bevel Lock Knob (39) | Angle Gauge |
|
| (additional Bevel Lock Knob |
|
|
| on other side of saw) |
|
|
| Figure D |
|
|
Item 69231 | For technical questions, please call | Page 9 | |
SETUP
OPERATION
MAINTENANCE
