TO PREVENT SERIOUS INJURY READ AND UNDERSTAND ALL WARNINGS
For technical questions or replacement parts, please call
2 HP PRESSURE WASHER 1300 PSI Model
AND INSTRUCTIONS BEFORE USE
UNPACKING
PRODUCT SPECIFICATIONS
GENERAL SAFETY RULES IMPORTANT SAFETY INSTRUCTIONS
SAVE THIS MANUAL
ELECTRICAL SAFETY
WORK AREA
For technical questions, please call
1. Stay alert. Watch what you are doing, and use common sense when oper- ating a power tool. Do not use a power tool while tired or under the influ- ence of drugs, alcohol, or medication. A moment of inattention while operat- ing power tools may result in serious personal injury
PERSONAL SAFETY
TOOL USE AND CARE
For technical questions, please call
3.WARNING! RISK OF INJECTION OR SEVERE INJURY
SPECIFIC SAFETY RULES
SERVICE
For technical questions, please call
13. This product is intended for outdoor residential use only
10. Do not handle the Ground Fault Circuit Interrupter with wet hands
Cleaning” section
4. Use the right product for the right job. There are certain applications for which this product was designed. Do not use small equipment, tools, or attachments to do the work of larger industrial equipment, tools, or attachments. Do not use this product for a purpose for which it was not intended
outlet installed by a qualified electrician
SAVE THESE INSTRUCTIONS GROUNDING
For technical questions, please call
FIGURE A
EXTENSION CORDS
GROUNDED TOOLS TOOLS WITH THREE PRONG PLUGS
See Figure B, next page
WARNING NEVER use 16 or 18 gauge extension cords
SYMBOLOGY
FIGURE B
of any length on this Pressure Washer
See Figure D
PRODUCT FEATURES AND PRECAUTIONS
FIGURE D
For technical questions, please call
TRIGGER SAFETY LOCK 25A TRIGGER 23A
FIGURE E
Pre-Operation Tips
For technical questions, please call
To Set Up The Pressure Washer
ASSEMBLY AND OPERATING INSTRUCTIONS
Assembly Diagrams on pages 18 and
FIGURE F
See Figure H
Trigger before making any spray pattern adjustments. See Figure H
To Adjust The Spray Pattern
FIGURE H
See Figure F, page
FIGURE J
To Apply A Detergent
See Figure F
How To Avoid Damaging Surfaces
INSPECTION, MAINTENANCE, AND CLEANING
Shutdown Precautions
For technical questions, please call
See Figure K
5. To Clean The Nozzle
Do not use damaged equipment
FIGURE K
For technical questions, please call
PARTS LIST
PLEASE READ THE FOLLOWING CAREFULLY
Cord
available individually as replacement parts
ASSEMBLY DIAGRAM
o o o
For technical questions, please call
available individually as replacement parts
PARTS LIST - CONTINUED
ASSEMBLY DIAGRAM - CONTINUED
For technical questions, please call
