2 HP PRESSURE WASHER 1300 PSI Model
For technical questions or replacement parts, please call
TO PREVENT SERIOUS INJURY READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE
GENERAL SAFETY RULES IMPORTANT SAFETY INSTRUCTIONS
PRODUCT SPECIFICATIONS
UNPACKING
SAVE THIS MANUAL
WORK AREA
ELECTRICAL SAFETY
For technical questions, please call
TOOL USE AND CARE
PERSONAL SAFETY
1. Stay alert. Watch what you are doing, and use common sense when oper- ating a power tool. Do not use a power tool while tired or under the influ- ence of drugs, alcohol, or medication. A moment of inattention while operat- ing power tools may result in serious personal injury
For technical questions, please call
SERVICE
SPECIFIC SAFETY RULES
3.WARNING! RISK OF INJECTION OR SEVERE INJURY
For technical questions, please call
Cleaning” section
10. Do not handle the Ground Fault Circuit Interrupter with wet hands
13. This product is intended for outdoor residential use only
4. Use the right product for the right job. There are certain applications for which this product was designed. Do not use small equipment, tools, or attachments to do the work of larger industrial equipment, tools, or attachments. Do not use this product for a purpose for which it was not intended
SAVE THESE INSTRUCTIONS GROUNDING
outlet installed by a qualified electrician
For technical questions, please call
GROUNDED TOOLS TOOLS WITH THREE PRONG PLUGS
EXTENSION CORDS
FIGURE A
See Figure B, next page
FIGURE B
SYMBOLOGY
WARNING NEVER use 16 or 18 gauge extension cords
of any length on this Pressure Washer
FIGURE D
PRODUCT FEATURES AND PRECAUTIONS
See Figure D
For technical questions, please call
Pre-Operation Tips
FIGURE E
TRIGGER SAFETY LOCK 25A TRIGGER 23A
For technical questions, please call
Assembly Diagrams on pages 18 and
ASSEMBLY AND OPERATING INSTRUCTIONS
To Set Up The Pressure Washer
FIGURE F
To Adjust The Spray Pattern
Trigger before making any spray pattern adjustments. See Figure H
See Figure H
FIGURE H
To Apply A Detergent
FIGURE J
See Figure F, page
See Figure F
Shutdown Precautions
INSPECTION, MAINTENANCE, AND CLEANING
How To Avoid Damaging Surfaces
For technical questions, please call
Do not use damaged equipment
5. To Clean The Nozzle
See Figure K
FIGURE K
PLEASE READ THE FOLLOWING CAREFULLY
PARTS LIST
For technical questions, please call
Cord
o o o
ASSEMBLY DIAGRAM
available individually as replacement parts
For technical questions, please call
ASSEMBLY DIAGRAM - CONTINUED
PARTS LIST - CONTINUED
available individually as replacement parts
For technical questions, please call
