AND INSTRUCTIONS BEFORE USE
For technical questions or replacement parts, please call
2 HP PRESSURE WASHER 1300 PSI Model
TO PREVENT SERIOUS INJURY READ AND UNDERSTAND ALL WARNINGS
SAVE THIS MANUAL
PRODUCT SPECIFICATIONS
GENERAL SAFETY RULES IMPORTANT SAFETY INSTRUCTIONS
UNPACKING
WORK AREA
ELECTRICAL SAFETY
For technical questions, please call
For technical questions, please call
PERSONAL SAFETY
TOOL USE AND CARE
1. Stay alert. Watch what you are doing, and use common sense when oper- ating a power tool. Do not use a power tool while tired or under the influ- ence of drugs, alcohol, or medication. A moment of inattention while operat- ing power tools may result in serious personal injury
For technical questions, please call
SPECIFIC SAFETY RULES
SERVICE
3.WARNING! RISK OF INJECTION OR SEVERE INJURY
4. Use the right product for the right job. There are certain applications for which this product was designed. Do not use small equipment, tools, or attachments to do the work of larger industrial equipment, tools, or attachments. Do not use this product for a purpose for which it was not intended
10. Do not handle the Ground Fault Circuit Interrupter with wet hands
Cleaning” section
13. This product is intended for outdoor residential use only
SAVE THESE INSTRUCTIONS GROUNDING
outlet installed by a qualified electrician
For technical questions, please call
See Figure B, next page
EXTENSION CORDS
GROUNDED TOOLS TOOLS WITH THREE PRONG PLUGS
FIGURE A
of any length on this Pressure Washer
SYMBOLOGY
FIGURE B
WARNING NEVER use 16 or 18 gauge extension cords
For technical questions, please call
PRODUCT FEATURES AND PRECAUTIONS
FIGURE D
See Figure D
For technical questions, please call
FIGURE E
Pre-Operation Tips
TRIGGER SAFETY LOCK 25A TRIGGER 23A
FIGURE F
ASSEMBLY AND OPERATING INSTRUCTIONS
Assembly Diagrams on pages 18 and
To Set Up The Pressure Washer
FIGURE H
Trigger before making any spray pattern adjustments. See Figure H
To Adjust The Spray Pattern
See Figure H
See Figure F
FIGURE J
To Apply A Detergent
See Figure F, page
For technical questions, please call
INSPECTION, MAINTENANCE, AND CLEANING
Shutdown Precautions
How To Avoid Damaging Surfaces
FIGURE K
5. To Clean The Nozzle
Do not use damaged equipment
See Figure K
Cord
PARTS LIST
PLEASE READ THE FOLLOWING CAREFULLY
For technical questions, please call
For technical questions, please call
ASSEMBLY DIAGRAM
o o o
available individually as replacement parts
For technical questions, please call
PARTS LIST - CONTINUED
ASSEMBLY DIAGRAM - CONTINUED
available individually as replacement parts