Chicago Electric 92146 manual Figure B, Figure C

6.If you are using an extension cord outdoors, make sure it is marked with the suffix “W-A” (“W” in Canada) to indicate it is acceptable for outdoor use.

7.Make sure your extension cord is properly wired and in good electrical condition. Always replace a damaged extension cord or have it repaired by a qualified electrician before using it.

8.Protect your extension cords from sharp objects, excessive heat, and damp or wet areas.

9.If an extension cord is needed, only use a cord with the proper gauge wire.

(See Figure B.)

RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS*

(120 VOLT)

	NAMEPLATE			EXTENSION CORD LENGTH
	AMPERES
	(At Full Load)
			25	50		75	100	150
			FEET	FEET		FEET	FEET	FEET
	0-2.0		18	18		18	18	16
	2.1-3.4		18	18		18	16	14
	3.5-5.0		18	18		16	14	12
	5.1-7.0		18	16		14	12	12
	7.1-12.0		16	14		12	10	-
	12.1-16.0		14	12		10	-	-
16.1-20.0			12	10		-	-	-
	FIGURE B		*Based on limiting the line voltage drop
			to five volts at 150% of the rated amperes.
	WARNING: NEVER use 16 or 18 gauge extension cords
			of any length on this Pressure Washer.
				SYMBOLOGY
					Double Insulated
					Canadian Standards
						Association
						Underwriters
					Laboratories, Inc.
			V ~		Volts Alternating
						Current
			A			Amperes
			no		No Load Revolutions
			xxxx/min.		Per Minute (RPM)
				FIGURE C
SKU 92146		For technical questions, please call 1-800-444-3353.						PAGE 9