PARTS LIST - Model 94896
IMPORTANT
When ordering parts, reference which model you are ordering parts for. Parts are
not interchangeable.
Part | Description | Qty. |
1 | 5” Saw Blades | 1 Set |
2 | Guard Plate | 1 |
3 | Swing Guard | 1 |
4 | Guard Washer | 1 |
5 | Screw M4 x 14 | 1 |
6 | Rubber Pin | 1 |
7 | Screw SA M4 x 12 | 1 |
8 | Guard | 1 |
10 | Tap Screw ST 4.2 x 35 | 4 |
11 | Gear Box | 1 |
12 | Side Handle | 1 |
13 | Cover | 1 |
14 | Pinion | 1 |
15 | Bearing | 1 |
16 | Armature | 1 |
17 | Bearing 606zz | 1 |
18 | Logo Label | 1 |
19 | Cord Protector | 1 |
20 | Tap Screw ST 4.2 x 12 | 1 |
21 | Cord Retainer | 2 |
22 | Lead IV | 2 |
23 | Spring | 1 |
24 | Switch Lever | 1 |
25 | Tap Screw ST 4.2 x 20 | 2 |
26 | Power Switch | 1 |
Part | Description | Qty. |
27 | Cover | 1 |
28 | Spring | 1 |
30 | Back Cover 1 | 1 |
31 | Tap Screw ST 4.2 x 16 | 2 |
32 | Warning Label | 1 |
33 | Switch | 1 |
35 | Housing | 1 |
36 | Stator | 1 |
37 | Tap Screw ST 4.2 x 14 | 2 |
38 | Power Cord | 1 |
39 | Brush | 2 |
40 | Brush Holder | 2 |
42 | Lock Nut | 1 |
43 | Wrench and pin | 1 |
44 | Wax Tubes | 6 |
45 | Lubricating Unit | 1 |
46 | Tap Screw ST 4.8 x 10 | 1 |
47 | Rotation label | 1 |
48 | Inductor Coil | 2 |
49 | Connector | 1 |
50 | Brush Cap | 2 |
51 | Bearing Insert | 1 |
52 | Guard Assembly* | 1 |
53 | Overload Protector | 1 |
| *Includes parts 2, 3, 4, & 8 |
|
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts.
PLEASE READ THE FOLLOWING CAREFULLY
The manufacturer and/or distributor has provided the parts list and assem- bly diagram in this manual as a reference tool only. Neither the manufacturer or distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product, or that he or she is qualified to replace any parts of the product. In fact, the manufacturer and/or distributor expressly states that all repairs and parts replacements should be undertaken by certified and licensed technicians, and not by the buyer. The buyer assumes all risk and liability arising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of replacement parts thereto.
SKUs | 94596 & | For technical questions, please call | Page 16 |
| 94896 |
|
|