11.Always use blades with correct size and shape (diamond vs. round) arbor holes. Blades that do not match the mounting hardware of the saw will run eccen- trically, causing loss of control.
12.Never use damaged or incorrect blade washers or bolts. The blade washers and bolt were specially designed for your saw, for optimum performance and safety of operation.
13.Always wear safety impact eye goggles when using theTwin Cutter
Saw. Always wear heavy duty work gloves when changing Saw Blades. Using personal safety devices reduces the risk for injury. A leather apron and arm protection may be advisable to protect from sparks created when cutting metal.
14.Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate surrounding workspace. Always keep work area free of obstruc- tions, grease, oil, trash, and other debris. Do not use a power tool in areas near flammable chemicals, dusts, and vapors. Do not use in a damp or wet location.
15.Avoid unintentional starting. Make sure you are prepared to begin work before turning on the Twin Cutter Saw.
16.Do not force the Twin Cutter Saw. This tool will do the work better and safer at the speed and capacity for which it was designed. Do not force the Saw Blades into the workpiece being cut.
17.Never leave theTwin Cutter Saw unattended when it is plugged into an electri- cal outlet. Turn off the tool, and unplug it from its electrical outlet before leaving.
18.Before using the Twin Cutter Saw, check to make sure the Saw Blades are properly mounted on the Arbor Adapter. Make sure the Saw Blades are sharp, and are not cracked or bent.
19.Industrial applications must follow OSHA guidelines.
20.When cutting a large workpiece, make sure its entire length is properly sup- ported. If necessary, use a roller stand (not included).
21.To avoid electrical shock, do not handle theTwin Cutter Saw or its Power Cord Plug with wet hands.
22.Make sure the workpiece is free from nails and any other foreign objects which can damage the Saw Blades.
23.Always check to make sure there are no electrical wires or cables in the cut- ting path of the Twin Cutter Saw.
24.Allow the Blades to run up to full speed before feeding them into a workpiece. When turning off the Twin Cutter Saw, allow the Saw Blades to stop on their own.
SKUs | 94596 & | For technical questions, please call | Page |
| 94896 |
|
|
