17.Never cut pieces too small to be held securely against the Table’s Fence without leaving enough space for the hand to be a safe distance from the Router Bit (not included).
18.Make sure the Table and surrounding area are clear with the exception of the workpiece to be cut.
19.Before each use of the Router, make sure it is securely attached to the Router Table.
20.The Router Table is designed for cutting flat workpieces only. Do not attempt to cut workpieces that are not flat.
21.The Router and Router Table are designed for cutting wood workpieces only. Do not attempt to use the Router and its Table to cut metal or other
22.Never attempt to cut more than one workpiece at a time.
23.Always make sure the work surface of the Router Table is clean and free of dust, wood chips, and other debris that can interfere with the cut you are going to make.
24.Always keep children and other unauthorized people away from the Router Table. Unplug the Table, and remove the
Power Switch’s Safety Key when the Table is not in use.
25.Never reach under the Router Table for any reason when the Router is running.
26.Avoid overloading the Router. If the speed drops abnormally, decrease the pressure on the workpiece immediately.
27.Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. There are certain applications for which this tool was designed. It will do the job better and more safely at the rate for which it was intended. Do not modify this tool, and do not use this tool for a purpose for which it was not intended.
28.Always use sharp Router Bits (not included). If the Bit stops abruptly, or the Bit becomes blocked, turn the Router Table’s
Power Switch to its “OFF” position immediately.
29.Before routing, run the Router for about ten seconds to ensure all moving parts are running smoothly and there are no loose parts, rattles, or sparking that would indicate damage.
30.WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities, contain chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some
SKU 95380 | For technical questions, please call | PAGE 6 |
