Chicago Electric 98452 This Unit Can Power The Following Items, Generator Support And Mounting

GENERATOR SUPPORT AND MOUNTING

Mount the Generator on a concrete slab capable of supporting the weight of the Gen- erator. The slab must extend on all sides beyond the Frame (41B) by a least one foot.

Contact a cement contractor for slab specifications if necessary. Attach the Frame to

the concrete slab using 3/8” diameter expansion anchor bolts (not supplied).

GROUNDING THE GENERATOR

Note: It is recommended that only a trained and licensed electrician perform this proce-

dure.

Connect a #6 AWG grounding wire (not included) from the Grounding Connector

(8)on the Generator to a grounding rod (not included) that has been driven at least

24 inches deep into the earth. The grounding rod must be an earth-driven copper or brass rod (electrode) which can adequately ground the Generator.

(See Figure B.)

THIS UNIT CAN POWER THE FOLLOWING ITEMS

ITEM	RUNNING	START-UP
	WATTS	WATTS
1/3 HP Air Compressor	720	1000
Belt Sander	1200	2400
Drum Mixer	700	1200
Motor 1/2 HP	875	2300
Reciprocating Saw	750	1400
Microwave Oven	1000	1200
Refrigerator/Freezer	700	2200
Sump Pump 1/2 HP	1050	2150
Vacuum Cleaner	1100	2200
Well Pump 1/2 HP	1000	2100

NOTE: Wattages listed above are estimates for that type of equipment only. Check name-

plate wattages on all loads before connecting to Generator.

SKU 98452 For technical questions, please call 1-800-444-3353. Page 12