MECHANICAL PRECAUTIONS
1.ALWAYS make sure the Power Switch is in its “OFF” position. Disconnect the spark plug wire, and allow the Engine to completely cool before carrying our maintenance.
2.Check for damaged parts. Before using the Generator, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts, any broken parts or mounting fitures, and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician.
3.The Generator is designed with guards for protection from moving parts. In any case, care must still be taken to protect personnel and equipment from other mechanical hazards when working around the generator.
4.Do not operate the Generator with safety guards removed. While the Genera- tor is running, do not attempt to reach around the safety guards for maintenance or any other reason.
5.Keep hands, arms, long hair, loose clothing, and jewelry away from oving parts. Be aware that when engine parts are moving fast they cannot be seen clearly.
6.Keep access doors on enclosures closed and locked when access is not required.
7.Whan working on or around the Generator always wear protective clothing including ANSI approved safety gloves, safety eye goggles, and safety hat.
8.Do not alter or adjust any part of the Generator that is assembled and sup- plied by the manufacturer.
9.Always follow and complete scheduled Engine and Generator maintenance.
CHEMICAL PRECAUTIONS
1.Avoid contact with hot fuel, oil, exhaust fumes, and solid surfaces.
2.Avoid body contact with fuels, oils, and lubricants used in the Generator and Engine. If swallowed, seek medical treatment immediately. Do not induce vomiting if fuel is swallowed. For skin contact, immediately wash with soap and water. For eye contact, immediately flush eyes with clean water.
SKU 98452 | For technical questions, please call | Page 9 |
