Chicago Electric 98452 To Start The Engine, See Figure E, For technical questions, please call

3.Before the first use, remove the Fuel Tank Cap (33B1) and fill the Fuel Tank (30B1) with unleaded gasoline. Then, replace the Fuel Tank Cap. If necessary, refill the

Fuel Tank with unleaded gasoline. (See Figure C.)

To Start The Engine:

1.Make sure the electrical powered tools/equipment that will be used is not plugged in to the Generator.

2.Turn the 115 volt AC Circuit Breaker (5) to its “ON” position. (See Figure D.)

3.Open the Fuel Valve (40B). (See Figure E.)

4.Move the Choke Lever (116C) to the CLOSED position to start a cold engine. Leave the Choke Lever (116C) in the open position to restart a warm engine.

(See Figure E.)

REV 09a

SKU 98452 For technical questions, please call 1-800-444-3353. Page 15