sure that there are no wires, hoses or other components behind the wall that will be damaged by drilling. Use Brackets A and B to grip the Battery Charger. Attach to the compartment wall using two Self Tapping Screws (12).
5.For mounting under the battery, as- semble Brackets A, B and C (9, 6 and 5) as shown in Figure 2 below.
Bracket A (9)
Side View of Brackets
Assembly
Slide Bracket C (5) under Battery
Bracket B (6)
Attach Output Wires to Battery Terminals.
6.Slide Bracket C (5) under the battery to hold the Charger in place.
7.Be sure the Battery Charger is firmly attached and will not come loose during normal vehicle use or during a sudden stop. Periodically check the
Charger to be sure it is still firmly at- tached. A loose Battery Charger can become damaged, or damage vehicle components.
8.Be sure the vehicle ignition switch is in the OFF position. Using the vehicle battery clamp bolts, attach the round connectors of the Output Wires (12)
to the battery. Be sure the Red Out- put Wire is attached to the Positive
(+) terminal and the Black Output wire is attached to the Negative
9.Keep Output Wires (12) and Power Cable (8) clear of fan, fan belt, pul- leys and any other moving parts of the engine.
Functions
1.When plugged in, this Battery Char- ger will charge a 12 VDC battery, and maintain the charge. You can see the state of charge by observing the LED lights on the Charger.
3 Stage Charging
1.This charger automatically works in three stages, depending on the con- dition of your battery.
SKU 99857 | For technical questions, please call | Page 9 |
