TROUBLESHOOTING GUIDE
SYMPTOM | POSSIBLE CAUSE | |
|
|
|
Light will not | 1. | Light switch is turned off. |
come on. | 2. | Bulb is loose or burned out. |
| 3. | Fuse is blown or circuit |
|
| breaker is turned off. |
| 4. | Daylight |
|
| (recheck after dark). |
| 5. | Incorrect circuit wiring, if |
|
| this is a new installation. |
| 6. | |
|
| desired area. |
|
|
|
Light comes | 1. | Light Control may be in- |
on in day- |
| stalled in a relatively dark |
light. |
| location. |
| 2. | Light Control is in Test. (Set |
|
| control switch to an ON- |
|
| TIME position.) |
|
|
|
Light comes | 1. | LightControlmaybesensing |
on for no |
| small animals or automobile |
apparent |
| traffic |
reason. | 2. | Sensitivity is set too high. |
|
| (Reduce sensitivity.) |
|
|
|
SYMPTOM | POSSIBLE CAUSE | |
|
|
|
Light stays | 1. | The sensor is pointed at |
on continu- |
| nearby objects that cause |
ously. |
| heat to trigger the sensor. |
|
| (Aim the sensor away from |
|
| nearby objects.) |
| 2. | The sensor is pointed |
|
| toward a heat source like |
|
| an air vent, dryer vent, |
|
| or |
|
| reflective surface. |
|
| sensor.) |
| 3. | Light control is in Manual |
|
| Mode. (Switch to Auto.) |
| 4. | LightcontrolisinDualBrite® |
|
| mode. |
|
| |
Light flashes | 1. Heat being reflected from | |
on and off. |
| other objects may be |
|
| affecting the sensor. (Re- |
|
| aim sensor.) |
|
|
|
Technical Service
Please call
product to store.
If you experience a problem, follow this guide. You may also want to visit our Web site at: www.desatech.com. If the problem persists, call* for assistance at
DESA Specialty Products
P.O. Box 90004, Bowling Green, KY
*If contacting Technical Service, please have the following information available: Model Number, Date of Purchase, and Place of Purchase.
