150°
6 ft.
(1.8 m) 
30 ft.
(9.1m)
Maximum Range | Maximum |
| Coverage Angle |
Thedetectorislesssensitivetomotiondirectlyto- wards it and more sensitive to across motion.
Motion | Motion |
| |
| Sensor |
Least Sensitive | Most Sensitive |
❒Walk through the coverage area noting where you are when the lights turn on. Move the sensor head left or right to change the coverage area.
Note: Grasp the sensor only as shown and turn the entire sensor. Any other method may damage the sensor. Do not force it past the stops.
❒If you need to change the sensitivity, temporarily remove the fixture and make the adjustment.Too much sensitivity may increase false triggering.
❒Set the amount of TIME you want the light to stay on after motion is detected. (1, 5, or 10 minutes).
❒Set the amount of time after dusk you want the lights on accent level.
SPECIFICATIONS
Range . . . . . . Up to 30 ft. (9.1 m) [varieswithsurrounding temperature].
Sensing Angle. . . Up to 150°, 240° adjustable
Electrical Load. . . See rating on fixture for maximum wattage Sensor Capacity . . Up to 360 Watts (3.0
A.) Maximum
Power Requirements 120 VAC, 60 Hz Operating Modes. . TEST, AUTO, and
MANUAL MODE Time Delay . . . . 1, 5, 10 minutes DualBrite® Timer. . 3, 6 hours,
dawn
DESA Specialty Products reserves the right to discontinue products and to change specifications at any time without incurring any obligation to incorporate new features in products previously sold.
240°
Sensor Aiming
Adjustment Angle
