Auto Feed Drill and Tapper Applications
Application | Application | Application | |||
! Hydraulic cylinder | ! Carburettor components | ! Aluminium casting | |||
! Drilling and tapping Ø6mm holes in alloy steel | ! Drilling 2 Ø3mm and a Ø10mm hole in aluminium | ! Drilling and tapping Ø8mm holes | |||
Tool Type | casting | Tool Type | |||
Tool Type | |||||
! 4 | ! 2 | ||||
! 1 | ! 2 | ! 2 | |||
control box | ! 1 | ! All tools fitted with interface kits and exhaust | |||
! 1 | R12104X 4 station rotary table | ! Base and bar clamps | collectors | ||
! Parallel and base clamps, tubes | ! 1 | R12104H 4 station rotary table with hydrocheck | ! Mounted on bar clamps to vertical slides for | ||
Cycle Time | Cycle Time | positioning | |||
Cycle Time | |||||
! 20 seconds | ! 5 seconds per component | ||||
|
|
|
| ! Under 20 seconds | |
Application | Application | Application |
! Automotive component | ! Air conditioning parts | ! Stainless steel component |
! Drilling Ø6.4mm hole, 32mm deep and 4 Ø5.5mm | ! Drilling 2 Ø6mm holes and spot facing 6 Ø16mm | ! Drilling Ø4mm and Ø8mm holes |
holes in mild steel | holes 1.5mm deep in cast aluminium replacing | Tool Type |
Tool Type | operations performed by a CNC machine | |
Tool Type | ! | |
! | hydraulic check units | |
hydraulic check unit | ! 2 | ! |
! | and hydraulic check units | check unit |
! 2 | ! | ! Both tools mounted in swivel, right angle and |
check units | and dwell kit | base clamps with tubes |
! Mounted on swivel and right angle clamps, base | ! AFDE41 in bar, swivel, right angle and base | Cycle Time |
clamps and tubes | clamps and tube | |
Cycle Time | Cycle Time | ! 8 seconds |
| ||
! 12 seconds | ! 8 |
|
15
