Chief Manufacturing CTA-2536 Reference only, Attaching Wall Arm to Wall Plate

Installation Instructions CTA-2536

STEP 3

Attaching Wall Arm to Wall Plate

1.Locate the wall arm, six M8 flat washers (40), six M8 lock washers (50), and six M8 x 16mm button head screws (60). See Figure 3.

2.Attach wall arm to wall plate (10) as follows:

a.Using the parts (40, 50, and 60) described in step 1 in the top mounting holes, attach the wall arm to the wall plate (10).

b.Using the parts (40, 50, and 60) described in step 1 in the bottom mounting holes, attach the wall arm to the wall plate (10).

c.Using the M5 Allen key (70), tighten the six M8 x 16mm button head screws (60) to secure the wall arm to the wall plate (10).

STEP 4 [REFERENCE ONLY]

Attaching Front Cover

1.Locate front cover and four M4 x 8mm Phillips head cap screws (shipped with wall arm).

NOTES

•The front cover may be partially removed and reinstalled to conceal power/audio/video cables after the TV/Mount is installed.

•You may remove one or both knockouts on cover to assist routing to wall through cover.

2.Install the front cover using four M4 8mm Phillips head cap screws. See Figure 4.

STEP 5 [REFERENCE ONLY]

Connecting NPT Pipe or Nipple to Wall Arm

1.Locate M6 x 6mm set screw and 1-1/2” NPT pipe or nipple (supplied with TV Mount or purchased separately).

2.Connect the 1-1/2” NPT pipe or nipple (supplied with TV Mount or purchased separately) to the wall arm. See Figure 5.

3.Using the M3 Allen key, install the M6 x 6mm set screw. Tighten the set screw.

WARNING

Make sure to tighten the M6 x 6mm set screw to prevent equipment damage or personal injury.

Figure 3. Attach Wall Arm to Wall Plate

Figure 4. Install Cover on Wall Arm

(Supplied with TV Mount or purchased separately)

Figure 5. Connect NPT Pipe or Nipple

to Wall Arm

5