Christie Digital Systems 103-008100-01 Computer Input, Selecting Input Source, RGB AV Hdcp

COMPUTER INPUT

SELECTING INPUT SOURCE

DIRECT OPERATION

Select an INPUT source by pressing the INPUT button on the top control or the INPUT 1, INPUT 2, or INPUT 3 buttons on the remote control.

If the projector cannot reproduce proper image, select a correct input source with the MENU OPERATION (see below).

NOTE:

•Input 1 terminal is switchable and can be used as Computer Input or Monitor Output.

	INPUT button
✽	Input 1
	Input 2

Input 3

✽Input 1 is not displayed when the Input 1 is used as Monitor out.

MENU OPERATION

WHEN SELECTING INPUT 1 (COMPUTER INPUT TERMINALS )

1	Press the MENU button to display the On-Screen Menu.
	Press the POINT LEFT/RIGHT buttons to move the red frame
	pointer to the INPUT Menu icon.
2	Press the POINT UP/DOWN buttons to move the red arrow
	pointer to Input 1 and then press the SELECT button. A
	Source Select Menu appears.
3	Move the pointer to a source that you want to select and then
	press the SELECT button.

RGB (PC analog)

When your computer is connected to the INPUT 1 (ANALOG) terminal, select RGB (PC analog).

RGB (Scart)

When scart video equipment is connected to the INPUT 1 (ANALOG) terminal, select RGB (Scart).

RGB (PC digital)

When your computer is connected to INPUT 1 (DIGITAL) terminal, select RGB (PC digital).

RGB (AV HDCP)

If a HDCP-compatible signal source is connected to the INPUT 1 (DIGITAL) terminal, select RGB (AV HDCP).

Monitor out

If the INPUT 1 ANALOG terminal is being used as a MONITOR OUT terminal, select Monitor out.

NOTE:

•INPUT SOURCE changes if the INPUT 1 button on the remote control is pressed.

•HDCP (High-bandwidth Digital Content Protection) is a system for protecting digital entertainment content which is delivered by DVI (Digital Visual Interface) from being copied. The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP.

INPUT MENU

INPUT Menu icon

Move the pointer (red arrow) to Input 1 and press the SELECT button.

Input 1

Source Select Menu

Move the pointer (red arrow) to a source and press the SELECT button.

24