APPENDIX
MAINTENANCE
WARNING TEMP. INDICATOR
The Warning Temp. indicator blinks red to let you know the internal temperature of the projector exceeds a normal level. If the temperature goes up further, the projector will be turned off automatically and the Ready indicator goes out. (The Warning Temp. indicator continues blinking.) After the
If the Warning Temp. indicator is still blinking, check the following matters:
–The ventilation slots of the projector may be blocked. In such a case, reposition the projector so that the ventilation slots are not obstructed.
–The air filters may be clogged with dust particles. Clean them by following the section “AIR FILTER CARE AND CLEANING” on the next page.
–If the WARNING TEMP. indicator remains on after performing above checks, the cooling fans or internal circuits may be malfunctioning. Contact the service station.
TOP CONTROL
Warning Temp. | Ready |
Indicator | Indicator |
When both of the Warning Temp. and Ready indicators are blinking:
When the projector detects an internal problem, it shuts down automatically and both the Warning Temp. and Ready indicators start blinking. In this condition, the projector cannot be turned on even if you press the POWER
46
