VIDEO INPUT
SELECTING VIDEO SYSTEM
1 | Press the MENU button to display the |
| Press the POINT LEFT/RIGHT buttons to move the red frame |
| pointer to the AV SYSTEM Menu icon. |
2 | Press the POINT UP/DOWN buttons to move the red arrow |
| pointer to the desired system and then press the SELECT |
button.
VIDEO JACK OR S-VIDEO JACK
Auto
The projector automatically detects an incoming video system, and adjusts itself to optimize its performance.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43,
AV SYSTEM MENU (VIDEO OR S-VIDEO)
AV SYSTEM Menu icon
This box indicates system being selected.
Move the pointer (red arrow) to system and press the SELECT button.
Y, Pb/Cb, Pr/Cr JACKS
Auto
The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance.
When the Video System is 1035i or 1080i, select the system manually.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video image, select a specific component video signal format from among 480i, 575i, 480p, 575p, 720p, 1035i, and 1080i.
AV SYSTEM MENU (COMPONENT VIDEO)
AV SYSTEM Menu icon
This box indicates system being selected.
Move the pointer (red arrow) to system and press the SELECT button.
32
