Cisco Systems 1010 manual Overview of the CES Port Adapter Modules

Overview of the CES Port Adapter Modules

This equipment uses USOC jacks as listed in Table 8-1:

Table 8-1	USOC Jacks for CES Port Adapter Modules
	Facility	Service Order
Model Name	Interface Code	Code	Jack Type
WAI-T1C-4RJ48	04DU9-BN	6.0N	N/A
WAI-T1C-4RJ48	04DU9-DN	6.0N	N/A
WAI-T1C-4RJ48	04DU9-1KN	6.0N	N/A
WAI-T1C-4RJ48	04DU9-1SN	6.0N	N/A
WAI-T1C-4RJ48	04DU9-1ZN	6.0N	N/A

Overview of the CES Port Adapter Modules

The circuit emulation service (CES) T1 and E1 Port Adapter Modules (see Figure 8-1) are ideal for links that require constant bit rate (CBR) services such as interconnecting PBXs, time-division multiplexers, and video conference equipment over campus, public, or private networks. The four ports on the PAM can be configured as redundant links using the switch's routing protocols. The T1 PAMs support UTP connectors and the E1 PAMs support either twisted-pair, STP, or 75-ohm BNC connectors. Status and carrier detect LEDs on each port give quick, visual indications of port status and operation. For detailed network management support, comprehensive statistics gathering and alarm monitoring capabilities are provided.

Cabling and Configuring the CES Port Adapter Modules 8-3