Cisco Systems 116T Examples of Using the FastHub

Overview 1-9

Examples of Using the FastHub

Examples of Using the FastHub

This section describes several possible network conﬁgurations using the FastHub.

Workgroups

You can create 100-Mbps workgroups by interconnecting FastHubs (FastHub 116T,

FastHub 216T, and FastHub 300 series), as shown in Figure1-5.

Figure 1-5 FastHubs in a Workgroup Application

S6322

100BaseT-enabled

router or switch

Workgroup of up to

15 users/servers

FastHub

216T

FastHub

300 series

stack

FastHub 116T

FastHub 316T

Workgroup of up to 31 users/servers

Workgroup of up

to 14 users/servers

Contents

Main CHAPTER 1 Overview Feature Summary Front Panel Description Ports Page LEDs RPS LED The redundant power system LED shows the status of the RPS (see Table1-2). SYSTEM LED COL LED Port Mode LED STAT Mode UTL Mode ID Mode Mode Button Rear Panel Description Overview 1-9 Examples of Using the FastHub This section describes several possible network congurations using the FastHub. Workgroups Figure 1-5 FastHubs in a Workgroup Application 1-10 FastHub 116T Installation Guide Server Farms Figure 1-6 FastHubs in a Server Farm Application Overview 1-11 Extended Network System Figure 1-7 FastHub in an Extended Network Application