Cisco Systems 1500 manual 5-11, Mount the acrylic cover on the front of the chassis

Chapter 5 Connecting Optical Cables

Connecting Local Lines to WCMs

Figure 5-7 Connecting Local Lines to a WCM

On/Err

Loop

L/R

L/T

R/R R/T

L/R

L/T

R/R

R/T

Local receiver fiber

Direction of light

Local transmission fiber

39360

Step 3 Remove the dust cover from the MiniSC plug of the local transmission fiber and clean the fiber as described in “Cleaning the Connectors” section on page 3-19.

Step 4 Remove the blind plug from the WCM connector labeled L/T. Connect the cleaned plug to the open connector of the WCM, as shown in Figure 5-7.

Step 5 Place the fiber-optic cables in the cable holder of the primary chassis and extension chassis and the rack at the side of both chassis.

Step 6 Mount the acrylic cover on the front of the chassis.

	Cisco Metro 1500 Series Hardware Installation Guide
78-10588-03		5-11