Chapter 5 Connecting Optical Cables
Testing a Remote Link
should be on. If the modulated light does not match the clock-recovery frequency, assuming a clock recovery is installed and enabled, the R/R LED will be red. The remote receiver of the local system sees the signal and transfers it to the local transmitter. The WCM in the local system should have the L/T, L/R, R/T, and R/R LEDs on.
Note If your test results deviate from these results and you cannot correct the problem, contact your Cisco service representative.
|
| Cisco Metro 1500 Series Hardware Installation Guide |
|
|
|
|
| ||
|
|
|
| |
|
|
|
