Chapter 5 Connecting Optical Cables
Connecting Remote Lines to a BSM
Connecting Remote Lines to RSMs
To connect remote lines to an RSM, follow these steps:
Step 1 Remove the dust cover from the MiniSC plug of the remote transmission fiber of line A, and clean the fiber as described in “Cleaning the Connectors” section on page
Step 2 Remove the blind plug from the RSM connector labeled A/T. Connect the cleaned plug to the open connector of the RSM, as shown in Figure
Figure 5-6 Connecting Remote Lines to an RSM
On | Lk |
A | B |
| LkA |
| LkB |
| Auto |
A/T |
|
A/R |
|
B/T |
|
B/R |
|
M |
|
D |
|
Transmission fiber of line A
Remote fiber of line A
Transmission fiber of line B
Remote fiber of line B
39359
|
| Cisco Metro 1500 Series Hardware Installation Guide |
|
|
|
|
| ||
|
|
| ||
|
|
|