D-2
Cisco Nexus 2000 Series Fabric Extenders Hardware Installation Guide
OL-19013-05
AppendixD LEDs
Chassis and Module LEDs for the Cisco Nexus 2000 Series Fabric Extenders
Chassis and Module LED Descriptions
Table D -1 describes the chassis LEDs for the Cisco Nexus 2000 Series FEXs.
TableD-1 LEDs for the Cisco Nexus 2000 Series FEXs
Component LED Status Description
Chassis
(front and back)
ID On
(blue)
Status Solid on
(green)
Off
On
(amber)
The module is booting or running diagnostics.
An overtemperature condition has occurred. The
temperature threshold has been ex ceeded by a
small value during environmental monitoring.
Blinking
(amber)
An overtemperature condition has occurred. The
temperature threshold has been ex ceeded by a
large value during environmental monitoring.
If the module fails during i nitial reset, the LED
continues to blink and th e module does not come
online.
The module has a runtime failure and is brought
offline.
Fan tray
(front of chassis)
Status Solid on
(green)
All diagnostics pass. The modul e is operational.
Off The module is not receiving power.
Solid on
(amber)
The module is booting or running diagnostics.
Blinking
(amber)
If the module fails during i nitial reset, the LED
continues to blink and th e module does not come
online.
The module has a runtime failure and is brought
offline.
Power supply
(front of chassis)
OK (green) Solid on Power supply is on and okay.
Blinking 12 voltage standby (V SB) is on but the power
supply unit is not powering the other modules.
Off No AC power to the power supply.
FAULT (amber) Solid on Power supply failures, overvoltage, overcurrent,
or overtemperature has occurred.
Blinking AC is present, 12 VSB on , and the power supp ly
is off.
Off Operating normally.