Cisco Systems 2000 - page 27

1-9
Cisco Nexus 2000 Series Hardware Installation Guide
OL-19013-05
Chapter1 Using a Fabric Extender with a Cisco Nexus 5000 Series Switch
Cisco Nexus 2248TP-E
To replace a fan tray, see the “Removing an d Installing the Fan Tray” section on page 3- 20. For LED
descriptions, see TableD-1 on page D-2.
Supported Transceivers and Cables
The Cisco Nexus 2248TP-E FEX supports SFP+ Ethernet transceivers. This section includes the
following topics:
•SFP Transceivers, page1-16
•SFP+ Copper Cables, page1 -17
SFP Transceivers
The enhanced Small-Form-Factor Pluggable (SFP+) 10-Gigabit Ethernet transceiver is a bidirectional
device with a transmitter and receiver. It has a 20-pin connector on th e electrical interface and dupl ex
LC connector on the optical interface. Currently, the Cisco Nexus 2248TP-E FEX supports the
short-range SFP and long-range SFP transceiver. Table 1-3 describes the SFP+ transceivers used with
the Cisco Nexus 2248TP-E FEX.
SFP+ Copper Cables
Copper interface cables are available for use with the 10-Gigabit Ethernet SFP+ transceiver. Table 1- 4
lists the available cables and provide s a brief description of the ca bles.
1Captive screws (2) 3Status LED
2 Black stripe indicates back-to-fro nt airflow
Table1-3 SFP Transceivers for the Cisco Nexus 2248TP-E FEX
Model Description
N2200 FET 10-Gigabit Ethernet for connections with a Cisco Nexus 5000 Series switch
SFP-10-Gigabit -SR 10-Gigabit Ethernet—short range SFP+ module
SFP-10-Gigabit -LR 10-Gigabit Ethernet—long range SFP+ module
Table1-4 Copper Cables for the Cisco Nexus 2248TP-E FEX
Model Description
SFP-H10GB-CU1M 10-Gigabit BASE-CU SFP+ Passive Cable
(1 meter)
SFP-H10GB-CU3M 10-Gigabit BASE-CU SFP+ Passive Cable
(3 meters)
SFP-H10GB-CU5M 10-Gigabit BASE-CU SFP+ Passive Cable
(5 meters)