Cisco Systems 300 quick start Returning the Device to the Factory Default Settings, Back Panel

Back Panel

The power port and console port are located on the back panel of the managed switch.

Power—The Power port is where you will connect the switch to power.

Console—The Console port is where you can connect a serial cable to a computers serial port for configuration using a terminal emulation program.

Returning the Device to the Factory

5 Default Settings

To use the Reset button to reboot or reset the managed switch, do the following:

•To reboot the managed switch, press the Reset button for less than 10 seconds.

•To restore the managed switch configuration to the factory default settings:

1.Disconnect the managed switch from the network or disable all DHCP servers on your network.

2.With the power on, press-and-hold the Reset button for more than 10 seconds.

300 Series Managed Switches 11