Cisco Systems 340, 350 - page 12

If you downloaded the utilities, select Start > Run and type the path of the temporary folder
into which you extracted the files. The example below shows a path of c:\temp\Setup.exe.
♦
When the Welcome screen appears, click Next.4.
In the Authentication Method window, select the server−based authentication method preferred for
wireless network access in your location and click Next.
If you select the default value, None, server−based authentication is not enabled for your
client adapter. After the client utilities install, you can elect not to implement any security
features, or you can activate some level of security by using WEP keys. Refer to the Cisco
Aironet Wireless LAN Adapters Software Configuration Guide for instructions on setting
WEP keys using CEM and enabling WEP through ACU, or refer to Configuring WEP.
♦
5.
Cisco − Install Windows 2000 Drivers and Utilities for the Cisco Aironet 340/350 Series Client Adapters