Caution: Do not force the PC card into the PC card slot of your computer. This can damage
both the card and the slot.
If the PC card does not insert easily, remove the card and reinsert it.3.

Install the PCI Client Adapter

Complete these steps to install a PCI Client Adapter.
Turn off the PC and all its components.1. Remove the computer cover.2. Remove the screw from the top of the CPU back panel above an empty PCI expansion slot.
This screw holds the metal bracket on the back panel.
Note: On most Pentium PCs, PCI expansion slots are white. Refer to your PC documentation for slot
identification.
3.
Examine the client adapter.
When the adapter is installed, the antenna connector and the LEDs face out of your computer and are
visible when you replace the cover. The bottom edge of the adapter is the connector you insert into an
empty expansion slot in your computer.
Caution: Static electricity can damage your client adapter. Before you remove the adapter
from the antistatic package, discharge static by touching a metal part of a grounded PC.
4.
Tilt the adapter so that the antenna connector and LEDs can slip through the opening in the CPU back
panel. Press the client adapter into the empty slot until the connector is firmly seated.
Caution: Do not force the adapter into the expansion slot. This can damage both the adapter
and the slot. If the adapter does not insert easily, remove the adapter and reinsert it.
5.
Reinstall the screw on the back panel of the CPU and replace the computer cover.6. Attach the 2−dBi antenna to the antenna connector of the adapter until it is finger−tight. Do not
overtighten. For optimal reception, position the antenna so it is straight up.
7.
Boot up the computer.8.
Install the Drivers
Complete these steps to install the drivers.
After you insert the client adapter into your computing device, Windows 2000 automatically detects
the device and briefly displays the Found New Hardware window.
The Update Device Driver Wizard window opens and guides you through the driver installation
1.
Cisco − Install Windows 2000 Drivers and Utilities for the Cisco Aironet 340/350 Series Client Adapters