If you select LEAP, LEAP is enabled on your client adapter, provided an EAP−enabled
RADIUS server runs on your network. After LEAP is enabled and your computer is rebooted,
your client adapter authenticates to the RADIUS server, uses your network logon and receives
a session−based WEP key.
♦
EAP is not available in all versions or for all operating systems. If EAP is available and you
select it, EAP enables on your client adapter, provided an EAP−enabled RADIUS server runs
on your network. If your computer does not use an operating system with built−in EAP
support, this option is not available. After EAP is enabled and your computer is rebooted,
your client adapter authenticates to the RADIUS server, uses your network logon and receives
a session−based WEP key.
♦
In the Select Components window, select the client utilities that you want to install and deselect any
that you do not want to install. Click Next.
6.
Cisco − Install Windows 2000 Drivers and Utilities for the Cisco Aironet 340/350 Series Client Adapters