Cisco Systems 3700 - page 5

5

Warning

Installation of the equipment must comply with local and national electrical codes.

Statement 1074

Warning

This product relies on the building’s installation for short-circuit (overcurrent)

protection. Ensure that the protective device is rated not greater than:

20A.

Statement 1005

Warning

Do not operate your wireless network device near unshielded blasting caps or in an

explosive environment unless the device has been modified to be especially qualified for

such use.

Statement 245B

Warning

In order to comply with FCC radio frequency (RF) exposure limits, antennas should be

located at a minimum of 7.9 inches (20 cm) or more from the body of all persons.

Statement 332

Caution The fasteners you use to mount an access point on a ceiling must be capable of

maintaining a minimum pullout force of 20 lbs (9 kg) and must use all 4 indented holes

on the mounting bracket.

Caution This product and all interconnected equipment must be installed indoors within the same

building, including the associated LAN connections as defined by Environment A of the

IEEE 802.af Standard.

Note The access point is suitable for use in environmental air space in accordance with section

300.22.C of the National Electrical Code and sections 2-128, 12-010(3), and 12-100 of the

Canadian Electrical Code, Part 1, C22.1. You should not install the power supply or power

injector in air handling spaces.

Note Use only with listed ITE equipment.

Contents

Main GETTING STARTED GUIDE Cisco Aironet 3700 Series Access Points Page 1 2 3 Page 4 5 External Antennas Internal Antennas Regulatory Domains Page 6 Page 7 The Controller Discovery Process Page Preparing the Access Point Page Page Page 8 9 10 11 Guidelines for Using Cisco Aironet Lightweight Access Points Using DHCP Option 43 Checking the Access Point LED Page Message Type Status LED Message Meaning Troubleshooting the Access Point Join Process Page 12 Manufacturers Federal Communication Commission Declaration of Conformity Statement Access Point Models Certification Number Module Models Certification Number Tested To Comply With FCC Standards FOR HOME OR OFFICE USE Page Page Guidelines for Operating Cisco Aironet Access Points in Japan Japanese Translation 03-6434-6500 Statement 371Power Cable and AC Adapter Industry Canada Canadian Compliance Statement Access Point Models Certification Number Module Models Certification Number French Translation European Community, Switzerland, Norway, Iceland, and Liechtenstein Access Point Models: Page Page Declaration of Conformity for RF Exposure Generic Discussion on RF Exposure This Device Meets International Guidelines for Exposure to Radio Waves This Device Meets FCC Guidelines for Exposure to Radio Waves This Device Meets the Industry Canada Guidelines for Exposure to Radio Waves Separation Distance MPE Distance Limit 0.63 mW/cm220 cm (7.87 inches) 1.00 mW/cm2 Additional Information on RF Exposure Distance d'loignement MPE Distance Limite 0.63 mW/cm220 cm (7.87 po) 1.00 mW/cm2 Page Chinese Translation Operation of Cisco Aironet Access Points in Brazil Regulatory Information Portuguese Translation Declaration of Conformity Statements 13 To configure DHCP Option 43 in the embedded Cisco IOS DHCP server, follow these steps: