Cisco Systems 4490 appendix Checking the Front Panel LEDs, 3-16, Color, State, Description

Chapter 3 Installing the Cisco Global Site Selector 4490

Checking the Front Panel LEDs

If you are booting the GSS 4490 for the first time and the system boots without a startup-configuration file, a setup script automatically runs to quickly guide you through the process of initially configuring the GSS. Refer to the Global Site Selector Configuration Guide, Chapter 2, Setting Up Your GSS and GSSM, for details.

Checking the Front Panel LEDs

When the Global Site Selector 4490 is up and running, observe the front panel LEDs. Figure 3-10shows the location of front panel LEDs, and Table 3-1describes their function.

Figure 3-10 Front Panel LEDs

1 2 3 4

83109

1

3

CD-ROM drive activity	2	System error
Hard disk drive activity	4	Power

Table 3-1 Front Panel LEDs

LED		Color	State	Description
CD-ROM drive		Green	On	Indicates that the CD-ROM drive is in use.
activity
System error		Amber	On	Indicates that a system error has occurred. An LED on
				the diagnostic LED panel will also be on to further
				isolate the error.
Hard disk drive		Green	Flashing	Indicates that the associated hard disk drive is in use.
activity
	Cisco Global Site Selector 4490 Hardware Installation Guide
3-16				78-15755-01