4 Attaching the Inner Slide Rail to the GSS | Cisco Systems 4490

Image 8

Cisco Systems 4490 appendix 4 Attaching the Inner Slide Rail to the GSS

Contents

Installing the Cisco Global Site Selector C H A P T E R Cisco Global Site Selector Hardware Installation Guide Unpacking and Inspecting the Global Site Selector Tools and Parts Required If the Product is Damaged Figure 3-1 Four-Post Rack Installation Kit 83198 Installing Your Unit Installing the Chassis in a Four-Post Rack Figure 3-2 Installing Clip Nuts or Cage Nuts in a Non-Threaded Rack Slide rail assembly Figure 3-4 Attaching the Inner Slide Rail to the GSS 2 Adjustment screw 3-10 Release tab 3-11 Installing the Chassis in a Two-Post RackCisco Global Site Selector 4490 Hardware Installation Guide Chapter 3 Installing the Cisco Global Site Selector 3-12 Repeat this step to secure the left side bracket to the rack Installing the Chassis on a Workbench or Tabletop 3-13 Connecting Cables 3-14 3-15 Connecting PowerBooting the System Checking the Front Panel LEDs 3-16Color State Table 3-1 Front Panel LEDs continued Removing or Replacing a Cisco Global Site Selector3-17 3-18 To physically remove a GSS 4490 from your network, follow these steps 3-19 To physically replace a GSS 4490, follow these steps 3-20