Cisco Systems 6200 Management Processor Card MPC, Functional Description, NTC STM-1 Specifications

1 Hardware Description				78-5296-02 10/02/98
	Table 1-6	NTC STM-1 Specifications
	Specification		Description
	External interface		One SDH STM-1 (155 Mbps). Single-mode
			(intermediate reach) and multimode STM-1
			versions available
	Connector type		SC
	Fiber types		• Single mode (up to 15 km)
			• Multimode (up to 2 km)
	Average transmitted power		• Single mode: –11.5 dBm
			•	Multimode: –17 dBm
	Average received power		• Single mode: –28 to –8 dBm
			• Multimode: –30 to –14 dBm
	Transmission distances		• Single mode: up to 15 km (9.2 miles)
			• Multimode: up to 2 km (1.2 miles)
	Wavelength (both modes)		1310 nm
	Level 2 protocol		ATM
	Timing		Loop timed
	Internal interface		16-bit parallel bus at 10 Mbps (160 Mbps
			total throughput)
	Internal hardware		•	Motorola MC68360
			•	0.5M of PROM
			• 4M of RAM
			•	Odetics SDH interface
	Dimensions		1.5 x 15.75 x 9.75 in
	(width x height x depth)		(3.8 x 40.0 x 24.8 cm)
	Weight		2 lb (0.9 kg)
	Power consumption		26W

1.4 Management Processor Card (MPC)

The Cisco 6200 is controlled and managed by the MPC.

1.4.1 Functional Description

The MPC performs management and storage tasks for the Cisco 6200 DSLAM. The MPC provides

•The Cisco IOS command line interface (CLI) for configuration and monitoring

•An SNMP agent for communicating between the Cisco 6200 and the PC running the Cisco 6200 Manager software

•Alarm contacts and environmental monitoring of key system resources

•Line card configuration and fault polling

•Nonvolatile storage of configuration information

•Two PCMCIA Flash slots for storage of software images and configuration data

1-18Cisco 6200 User Guide